Daisy Model 990 |
Post Reply | Page <123> |
Author | |
Dannop2
Red Ryder Member Joined: March-27-2018 Location: Lincolnton GA Points: 233 |
Post Options
Thanks(0)
|
After reflection I am sure it was a model 35 lever I used and had to do some work to make it work , did enlarge the hole , had to do some filling in and then some filing down but at the end it works and looks great , still have to find a stock as the Post Office of course broke it in half , cut a piece of wood to reinforce my repair and glued it all with Max-1 adhesive and fill kit , may wrap it with some nice leather and call it a day but still look for a stock now and then , hope this helps someone .
|
|
Realshooter
|
|
cobalt327
Red Ryder Member Joined: November-15-2013 Points: 3140 |
Post Options
Thanks(0)
|
This is the one I have. If anyone recognizes it, let me know what it goes to.
|
|
RRyder95
Red Ryder Member Joined: November-18-2012 Location: Iowa Points: 127 |
Post Options
Thanks(0)
|
"Dannop2 just shared this with me. This
is what he had to do. He used a 880 part" Dan just corrected his statement. He said he used a Model 35 Part. Not the 880 Lever They look very much alike, but the whole is bigger. I ordered the 880 and the 35. When they show up I can compare. I put a Mic on a 990 Lever like the one in your photo. I read .303" The Hole is .250. That one in your last photo must be from a 990
|
|
RRyder95
Red Ryder Member Joined: November-18-2012 Location: Iowa Points: 127 |
Post Options
Thanks(0)
|
Tried to post a photo, but never could get it to work https://imageshack.com/i/pmGpizdbj |
|
cobalt327
Red Ryder Member Joined: November-15-2013 Points: 3140 |
Post Options
Thanks(0)
|
The 880 and 35 bolt ass'y carries the same part number- 169762-K00.
This is RRyder95's bolt: |
|
cobalt327
Red Ryder Member Joined: November-15-2013 Points: 3140 |
Post Options
Thanks(0)
|
|
|
RRyder95
Red Ryder Member Joined: November-18-2012 Location: Iowa Points: 127 |
Post Options
Thanks(0)
|
Thanks for posting the photo. I have tried everything to post a photo. I gave up. The gray material on my part is JB Weld. An attempt to repair it. It did not work. Terry
|
|
RRyder95
Red Ryder Member Joined: November-18-2012 Location: Iowa Points: 127 |
Post Options
Thanks(0)
|
Sent a photo to your Email
|
|
cobalt327
Red Ryder Member Joined: November-15-2013 Points: 3140 |
Post Options
Thanks(0)
|
Here it is:
|
|
oldwizzer
Red Ryder Member Joined: February-15-2006 Location: United States Points: 1095 |
Post Options
Thanks(0)
|
Terry, try Postimage. I find it the easiest to use.
Ejwills.
|
|
Ejwills
|
|
Post Reply | Page <123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |