Daisy Museum Homepage
Forum Home Forum Home > Other Daisy Products > Questions
  New Posts New Posts RSS Feed - Model 25 trigger reinstilation issues
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Model 25 trigger reinstilation issues

 Post Reply Post Reply
Author
Message
flemishdude View Drop Down
Newbie
Newbie


Joined: March-06-2019
Points: 3
Post Options Post Options   Thanks (0) Thanks(0)   Quote flemishdude Quote  Post ReplyReply Direct Link To This Post Topic: Model 25 trigger reinstilation issues
    Posted: March-06-2019 at 7:56pm
Hi, 

I recently disassembled the trigger assembly of a model 25 and cannot for the life of me figure out how to correctly reassemble it. I'm totally lost as to where the trigger spring goes and how the trigger is linked to the firing mechanism 


thanks in advance 
Back to Top
39hunter View Drop Down
Red Ryder Member
Red Ryder Member
Avatar

Joined: August-09-2012
Location: Texas
Points: 374
Post Options Post Options   Thanks (0) Thanks(0)   Quote 39hunter Quote  Post ReplyReply Direct Link To This Post Posted: March-06-2019 at 8:40pm

First remove the take down screw and separate (or move) the barrel assembly from the receiver.  This will allow the safety bar lever to lower and rest on the bottom of the frame.  Remove the stock.  Check to make sure the trigger is installed correctly with the sear below the trigger screw, and then using your long needle nose pliers, grasp the long leg of the trigger spring and insert the spring deep into the cavity of the trigger.  The end of the long leg of the spring will rest on the safety bar lever and will hang over the bar about a 1/4" with the short leg pushing upward on the sear.  Now place the barrel section back into the receiver and replace the take down screw, (you can cock it and see if it works ok) now replace the stock

My emails on my profile if you want a diagram.

Pat
Back to Top
flemishdude View Drop Down
Newbie
Newbie


Joined: March-06-2019
Points: 3
Post Options Post Options   Thanks (0) Thanks(0)   Quote flemishdude Quote  Post ReplyReply Direct Link To This Post Posted: March-06-2019 at 8:53pm
just emailed you, thanks so much 
Back to Top
cobalt327 View Drop Down
Red Ryder Member
Red Ryder Member
Avatar

Joined: November-15-2013
Points: 1089
Post Options Post Options   Thanks (0) Thanks(0)   Quote cobalt327 Quote  Post ReplyReply Direct Link To This Post Posted: March-07-2019 at 2:52am
In case someone finds this during a search, here's a diagram that shows some details.
 
Back to Top
BSAGuy View Drop Down
Red Ryder Member
Red Ryder Member
Avatar

Joined: January-30-2019
Location: Central NC
Points: 194
Post Options Post Options   Thanks (0) Thanks(0)   Quote BSAGuy Quote  Post ReplyReply Direct Link To This Post Posted: March-09-2019 at 9:46am
Cobalt,

That is the best picture/diagram that I have seen on the 25 trigger.  Thanks for the highlighting.

Great verbal description also, 39hunter.  Very clear and straightforward.

I have copied both to my Daisy repair tips document that I have in Word. 
Be Prepared
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.03
Copyright ©2001-2015 Web Wiz Ltd.