Print Page | Close Window

stock interchange Daisy 105 - 1938B

Printed From: Daisy Museum
Category: Daisy Airguns
Forum Name: Questions
Forum Description: To help users communicate about Daisy Aiguns
URL: http://forum.daisymuseum.com/forum_posts.asp?TID=10007
Printed Date: October-27-2021 at 9:22am
Software Version: Web Wiz Forums 11.03 - http://www.webwizforums.com


Topic: stock interchange Daisy 105 - 1938B
Posted By: MarvMar
Subject: stock interchange Daisy 105 - 1938B
Date Posted: August-26-2021 at 2:58pm
There are some custom built stocks and forearms on e-bay, built for the Daisy 105. Will a 105 stock fit on the Daisy 1938B?

-------------
Marv, NW OH



Replies:
Posted By: Airitis
Date Posted: August-26-2021 at 3:49pm
It should. I believe the receivers are the same. The 1938B has a longer barrel and a fake under-barrel magazine.

-------------
Air-It-Is


Posted By: MarvMar
Date Posted: August-26-2021 at 4:00pm
Thanks....I have over 100 Daisy Red Ryders and not a single 105. I'm going to take a chance.

-------------
Marv, NW OH


Posted By: MarvMar
Date Posted: August-26-2021 at 5:30pm
Russ, Now how about the levers. Could you replace a straight plastic 105 with a curved plastic 1938B?  (If you also replaced the stock with a 1938B?)


Or...to make things simple...replace the stock and lever on the 105 with parts from 1938B.


-------------
Marv, NW OH


Posted By: Airitis
Date Posted: August-26-2021 at 5:53pm
The modern levers all have the same depth and pivot point. The straight ones fit the straight stocks and the curved ones fit the curved stocks. I have even interchanged the plastic and aluminum ones. Heck, Ive scabbed oned from the toy 960's and they fit the BB guns. I think DAISY decided to to save production costs and used a boat load of the same parts on many guns. BTW, I've interchanged levers on the 1938B RED RYDERSs, 105 BUCKs, and 95, 96, 99s, etc.

If you have a BUCK and you want to put a RED RYDER stock on it to make it bigger and cooler? I say GO FOT IT!!

-------------
Air-It-Is


Posted By: Airitis
Date Posted: August-26-2021 at 8:27pm
Marv, I think I misunderstood. You want to put a BUCK 105 stock on a RED RYDER? That should also work but the 105 doesn't have a factory forearm and no fake magazine. If the custom forearm was made for the 105, and is not routed for a fake magazine, you may have to do a little fenageling. You could always remove the magazine tube from the RR, if necessary.

-------------
Air-It-Is


Posted By: MarvMar
Date Posted: August-26-2021 at 9:35pm
Russ, You were right first time. The fella who is selling those custom stocks says they will fit the 105.
I want to use them on a 1938B. He doesn't have a 1938 to compare and I don't have the 105. We'll get it figured out. Marv


-------------
Marv, NW OH


Posted By: Oldgeorge
Date Posted: August-27-2021 at 12:42am
Marv go to Shane at restomod daisy he has video on you tube I believe most small frame Daisy stock will interchange with each other I have Daisy put stock from 1938b on a 105b before and it worked just fine and the forearm. but look up Shane video for sure. Old George


Posted By: jptix12738
Date Posted: September-02-2021 at 7:56pm
I'm new here, i'm looking for a stock for a model 799-19052 sears b-b gun, 



-------------
jptix


Posted By: Bavaria55n
Date Posted: September-03-2021 at 12:59pm
That would be an 1894 'Golden Spike' for those wondering.
Gary



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.03 - http://www.webwizforums.com
Copyright ©2001-2015 Web Wiz Ltd. - http://www.webwiz.co.uk