Questions - Daisy Legacy Model 2201 .22

Print Page | Close Window

Daisy Legacy Model 2201 .22

Printed From: Daisy Museum
Category: Other Daisy Products
Forum Name: Questions
Forum Description: To help users communicate about other Daisy products
URL: http://forum.daisymuseum.com/forum_posts.asp?TID=1827
Printed Date: May-29-2023 at 2:02am
Software Version: Web Wiz Forums 11.03 - http://www.webwizforums.com

Topic: Daisy Legacy Model 2201 .22

Posted By: Barry
Subject: Daisy Legacy Model 2201 .22
Date Posted: March-25-2007 at 7:47am

Looking for more information about this rifle. I know they were made in 1968. And there were 3 types made. I believe ours is one of 19000 made. Would like to know how to tell which of the three types it is and what it is worth.

Replies:

Posted By: plevesque
Date Posted: March-25-2007 at 5:26pm

You're off by about 20 years! The VL was produced in 1968, but that rifle was unrelated to the Legacy rifles that came out in the late 1980s.

The Legacy series was a line geared toward kids working their way up from airguns to "real" firearms. Each of the three models featured a butt with adjustable length of pull and removable trigger guard. More expensive versions eliminated the adjustable plastic stock and replaced it with a walnut stock of fixed length. The models offered were 2201 single shot, 2202 bolt-action repeater, and 2203 semiautomatic. The walnut versions were numbered 2211, 2212, and 2213 respectively according to Daisy, but the markings on the barrel are identical to the plastic-stocked versions.

Paul

Posted By: Thumbuster
Date Posted: April-15-2007 at 3:32am

Can anyone furnish me a copy of a parts breakdown and disassembly instructions for a Daisy model 2202 Legacy Rifle? Thanks,

-------------
Skip

Posted By: Steeler
Date Posted: May-04-2008 at 7:03am

If you are still interested I have the assembly/disassembly instructions but not the parts breakdown for the Daisy 2202. I have it in word format...If you contact me I can email the instructions to you...

Posted By: elderbin
Date Posted: May-30-2008 at 6:02pm

There were just three types. 10 shot Simi-auto, 7 shot clip bolt action and a single shot bolt action. However each model came in three different finsihes. Real wood, brown plastic immatation wood and Black Plastic. The 10 round simi-auto used the ruger round box clip. The 7 shot bolt action used the typical straight clip.

-------------
Elder, born American and proud of it.

Posted By: BearlyGriz2
Date Posted: December-28-2009 at 7:06am

Can you send me the breakdown instructions for the Daisy/Legacy 22 Model 2202? Need to get the stock bolt tightened back up, and cannot see where to get into it.

Thank-you,

Chuck

mailto:BearlyGriz@comcast.net - BearlyGriz@comcast.net

Posted By: ggannon
Date Posted: January-08-2010 at 1:28am

You need to remove the butt plate of the gun to access. You need a very long #2 Phillips screwdriver.

Glenn

Posted By: BearlyGriz
Date Posted: March-31-2010 at 6:28am

The stock ahas an adjustable buttplate. Do not see a way to remove it.

-------------
Griz

Posted By: vonrang
Date Posted: September-14-2010 at 12:49pm

Does have a Daisy Legacy barrel spanner wrench for sale, or that I could borrow to make a copy.

vonrang@hotmail.com

Posted By: boggs87
Date Posted: September-28-2013 at 12:39pm

i have one will email it to you.email me boggs87@yahoo.com

Posted By: boggs87
Date Posted: September-28-2013 at 12:41pm

i can make you one email me at boggs87@yahoo.com

Posted By: boggs87
Date Posted: September-28-2013 at 12:45pm

i have one will email it to you.email me boggs87@yahoo.com

Posted By: boggs87
Date Posted: September-28-2013 at 12:50pm

i have one. can make you a copy. email me at boggs87@yahoo.com

Posted By: dgbxii
Date Posted: November-07-2013 at 3:00am

Does anyone know how to remove the Buttstock for the Daisy 2201? The screw holding the stock to the receiver has come loose inside the stock. My grandfather gave me this gun and I would like to get everything reattached.

Posted By: wetdog
Date Posted: November-07-2013 at 6:47pm

dgbxii
With the adjustable butt plate closed, push button down and move to the first notch back. Push button down and turn 1/4 turn counter clockwise. Button and spring will come out allowing butt plate to be removed. Reverse to re-install. Hope this helps you out.

Posted By: biglou13
Date Posted: August-06-2014 at 8:11pm

Just joined. Can you still make the spanner wrench for model 2202?

Posted By: Nicho1s
Date Posted: July-20-2021 at 4:44am

Did you ever find a barrel spinner wrench? Looking for the source, if you did. Thank you for your assistance.