Print Page | Close Window

help with a Ted Williams 799-190720

Printed From: Daisy Museum
Category: Daisy Airguns
Forum Name: Questions
Forum Description: To help users communicate about Daisy Aiguns
URL: http://forum.daisymuseum.com/forum_posts.asp?TID=607
Printed Date: November-27-2022 at 11:54pm
Software Version: Web Wiz Forums 11.03 - http://www.webwizforums.com


Topic: help with a Ted Williams 799-190720
Posted By: PSI44
Subject: help with a Ted Williams 799-190720
Date Posted: February-16-2005 at 10:52am

I just received a Ted Wolliams model 799-190720.  It was completely disassembled.  I got a hold of a cross section of a el- dorado 799-190721.  I have 2 questions:

1-I have heard these rifles have problems holding air, and I do.  I have changed all o-ring and I get the same weak pressure with 1 pump or 8.  Is there anything else I could try?

2-I also have two plastic washers that are flat on one side and rounded off on the other.  They are not on the cross section of the 799-190721 and i can't for the life of me figure out where they came from(which may be my problem #1?).  Everything else looks the same, but they may be slightly different. 

Any help would be appreciated.  Thanks.




Replies:
Posted By: pinball-1
Date Posted: February-16-2005 at 11:25am
Is your rifle a 1984 (Winchester 30/30 replica)?


Posted By: PSI44
Date Posted: February-16-2005 at 3:12pm
The fella who gave it to me said he bought it around 1978.  The only markings are "Ted Williams Brand, Sears & Roebuck Co., Model 799-190720


Posted By: stevec
Date Posted: February-16-2005 at 9:51pm

Hi

The only thing I know is it is not an 1894 model

Stevec



Posted By: PSI44
Date Posted: February-17-2005 at 9:11am
Just to add some info.  I tested it out some more this morning.  When it is pumped, it will put air pressure in the air chamber and hold.  When the lever is moved out to pump again, it looses the pressure.  Thats why I always have the same weak pressure.  It seems that the piston that lets the air into the air chamber won't hold.  This piston seats itself into a metal to metal seal.  I don't have any o-rings or gaskets to change here.  I am still at a loss and would appreciate any help. 


Posted By: musicthings
Date Posted: February-17-2005 at 2:58pm
I think this rifle has the same interworks as the 880 series.  It pumps and loads similar to those rifles and would guess the internals are the same as the 880.  Daisy did make private label guns for sears and others.


Posted By: PSI44
Date Posted: February-20-2005 at 11:51am
I checked out the 880 and it does look identical.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.03 - http://www.webwizforums.com
Copyright ©2001-2015 Web Wiz Ltd. - http://www.webwiz.co.uk