Print Page | Close Window

C31 pistol, week fire

Printed From: Daisy Museum
Category: Daisy Airguns
Forum Name: Questions
Forum Description: To help users communicate about Daisy Aiguns
Printed Date: December-07-2019 at 2:41pm
Software Version: Web Wiz Forums 11.03 -

Topic: C31 pistol, week fire
Posted By: peddlinannie
Subject: C31 pistol, week fire
Date Posted: November-26-2018 at 1:13pm
I'm hoping someone can help my son. He has a C31 air pistol that has a "weak fire," as he describes it. It doesn't seem to be leaking c02 (ast least, there's still plenty of c02 left in the cartridge, and we've tried changing them with the same results), but the bbs don't shoot nearly as fast as they did when the gun was new. You can actually see the bb just spits out with no power. Any ideas on what's causing this, and what we could do to fix it? Thanks in advance!

Posted By: Daily shooter
Date Posted: November-26-2018 at 1:34pm
Are you putting a drop of Pellgunoil on the tip of the co2 carts? If not, you should. Gun may have dry seals or o rings.

Posted By: peddlinannie
Date Posted: November-28-2018 at 8:42pm
Thanks, we'll try that. 

Posted By: the fuse
Date Posted: December-02-2018 at 3:32pm
I'm with Tom. Sounds like you have a pistol that is starved for gas. I'd give it a good drink of ATF, pelgun oil, or NON-detergent motor oil on the piercing cup, put a new cart in and dry fire it out. Then I'd put a drop on the piercing pin cup every Co2 cart. you put in it from here on out. I'd see if I couldn't find other ways to get oil in to the moving parts, as well. Alternatively, there is a fine mesh filter in there somewhere that the Co2 has to go through. Maybe that is full of muck and gas can't get through fast enough. (pretty sure your son has a Crosman C31 pistol) Smile 

All I'm for is the liberty of the individual.

Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.03 -
Copyright ©2001-2015 Web Wiz Ltd. -