Print Page | Close Window

DATING THE DAISY MODEL 1200 CO2 BB PISTOL

Printed From: Daisy Museum
Category: Daisy Airguns
Forum Name: Questions
Forum Description: To help users communicate about Daisy Aiguns
URL: http://forum.daisymuseum.com/forum_posts.asp?TID=8278
Printed Date: August-10-2022 at 1:34pm
Software Version: Web Wiz Forums 11.03 - http://www.webwizforums.com


Topic: DATING THE DAISY MODEL 1200 CO2 BB PISTOL
Posted By: cobalt327
Subject: DATING THE DAISY MODEL 1200 CO2 BB PISTOL
Date Posted: July-08-2019 at 2:37am

The 1200 was made between 1977 and 1995. Obviously the number stamped into the left rear of the gun should be used whenever possible, but in cases where the number isn't available like from photos, this can help narrow the date of a particular gun. Also, there were changes made to the number formatting and those changes, along with clues from the gun in question, can be used to determine what the year is.

This is a work in progress, so there are gaps that need to be narrowed down. Feel free to add whatever info you can to help make this more complete.
Additional info on dating Daisy guns: http://forum.daisymuseum.com/topic8278_post37195.html#37195" rel="nofollow - HOW TO TELL WHEN MY GUN WAS MADE- Reg/Lot No. code
 

WHEN DID LOT NO. CHANGE TO LOT (no “NO.”)?
“LOT NO.” used on all from 1977 until 1981 Aug.
1981 Aug. earliest seen with LOT (no “NO.”) H104991
1983 Aug. latest seen with LOT (no “NO.”) H3x4991

 

WHEN DID LOT CHANGE TO JUST THE NUMBER (no “LOT NO.” or “LOT”)?
1984 Nov. earliest seen w/o “LOT” 5C40097

 

WHEN DID SERRATIONS ON TOP RAIL BEGIN AND END? (more data needed to narrow this down- photos showing the top of guns are scarce)
Serrations began in 1977, seen through at least 1986 Sept. 6J40343
1992 April 2D10204 has no serrations

 

WHEN DID BREECH CHANGE TO PLASTIC?
1992 April 2D10204 has a plastic breech (gun on right in photo below)

 

WHEN DID “U.S. PAT.” BEGIN?
1979 May LOT NO. E982477 has no PAT. NO. on right side 
1980 June LOT NO. F013131 has PAT NO. on right side

 

WHEN DID ADJUSTABLE WINDAGE END?
1988 Oct. 8K77457 (no LOT NO. before number) has adjustable windage
1991 Feb 1B10012 no adjustable windage

 

WHEN DID BB VIEW PORT END?
1979 Feb. LOT NO. B918616 has view port

1979 May LOT NO. E982477 does not have viewport

 

WHEN DID BILLBOARDS START?


1987 Sept. 7J13601 No Billboards 

1988 Sept. 8J09272 Has billboards both sides

WHEN DID GRIP RETENTION CHANGE FROM BALL & SPRING DETENT?
1991 Aug. 1H02738 has detent on bottom of grip
1992 May 2E12961 no detent bottom of grip

 

WHEN DID DAISY GRIP EMBLEM BECOME MOLDED IN?

1986 Sept. 6J40343 is molded

 

WHEN DID PIERCING CUP CHANGE?

1992 May 2E12961 has large silver cup

1993 Feb. 3B04711 has small black cup


WHEN DID 3 TRIGGER SPRINGS START?
1989 July 9G04512 has 2 trigger springs
1992 April 2C602O2 has 3 trigger springs




Replies:
Posted By: Bavaria55n
Date Posted: July-08-2019 at 8:39am
Great research. Nice to see this information collected and shared.
Gary


Posted By: the fuse
Date Posted: July-11-2019 at 10:53pm
Thanks Mark. My 1st var. 1200 is dated Nov. 1977, by the lot no. Earliest 1200 I have found and I've found a lot of them. They are a favorite of mine. 

-------------
All I'm for is the liberty of the individual.


Posted By: cobalt327
Date Posted: July-12-2019 at 1:01am
This is my first one, it's 4-81 and a good shooter but it has too many misfires (shots w/o a BB in place). 



This is the one I just got that I need the cup for, it's a '77 like yours. 






Posted By: the fuse
Date Posted: July-12-2019 at 3:00pm
Nice lookers. I had a similar issue with misfires. I emailed you about it. Turned out that the holes in the BB "shuttle" affair were not quite lining up. A couple minutes with the Dremmel solved that problem. The gun is so easy to work on that you can have it apart and back together in 5 minutes. I love the BB window in the early models. You can see the BB drop into the breach. 

-------------
All I'm for is the liberty of the individual.


Posted By: cobalt327
Date Posted: July-12-2019 at 8:24pm
BTW, you are the reason I got a 1200! I also want a CO2 200, I'd prefer to find one that has been leakproofed, like how Jimmie here does it but haven't run across one yet. But the 1200 is a great BB pistol IMHO- accurate with a very good trigger. Add the adjustable sights and that makes it almost ideal. I just miss having true semiauto like the 200.

Same here on the window. After the first gun misfiring I immediately understood the benefits of having it. When I look inside my '81 I'll pay attention to the shuttle alignment, thanks.


Posted By: the fuse
Date Posted: July-15-2019 at 10:39pm
You're welcome on the 1200 refer. Smile
Yeah, the two holes that need to line up are both dependant on friction fits between steel and aluminum tubes..... and both fittings are "hammered" over and over every time you shoot it. I figure one or the other drifts over time. And mine is over 40 years old. 


-------------
All I'm for is the liberty of the individual.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.03 - http://www.webwizforums.com
Copyright ©2001-2015 Web Wiz Ltd. - http://www.webwiz.co.uk