Print Page | Close Window

Daisy 840 Grizzly parts

Printed From: Daisy Museum
Category: Daisy Airguns
Forum Name: Questions
Forum Description: To help users communicate about Daisy Aiguns
URL: http://forum.daisymuseum.com/forum_posts.asp?TID=9795
Printed Date: February-24-2021 at 6:22pm
Software Version: Web Wiz Forums 11.03 - http://www.webwizforums.com


Topic: Daisy 840 Grizzly parts
Posted By: RD Davis
Subject: Daisy 840 Grizzly parts
Date Posted: November-29-2020 at 4:48pm
I have one that when you pump it, you can hear the air seeping by. I tore it down and the plunger that goes into the aluminum tube and squeezes the air tight, appears to be cracked in the end. Does anyone have a good one they would turn loose of? Or, I saw a guy on youtube who said he'd had a similar problem and glued it all back together. Anybody here ever tried that?

-------------
RD Davis



Replies:
Posted By: RD Davis
Date Posted: November-29-2020 at 4:50pm
Incidentally, the O ring looked real good, dont believe it is a problem however I will be replacing it while it is going back together.

-------------
RD Davis


Posted By: RD Davis
Date Posted: December-17-2020 at 7:44am
OK then, thanks for the help.

-------------
RD Davis


Posted By: Airitis
Date Posted: December-19-2020 at 2:37pm
Hey RD, I feel your pain.

Contact me via my email address in my member profile. I just may be able to help. I have a couple of 840's and may be willing to part with one for repair purposes.   

-------------
Air-It-Is


Posted By: RD Davis
Date Posted: December-20-2020 at 7:50am
Alright Sir, thank you for the help!

-------------
RD Davis



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.03 - http://www.webwizforums.com
Copyright ©2001-2015 Web Wiz Ltd. - http://www.webwiz.co.uk